Get the Full Spectrum Warrior: Ten Hammers demo off WP (418mb)
1. SYSTEM REQUIREMENTS
Please note that Full Spectrum Warrior:Ten Hammers does not support Microsoft(r) Windows(r)
95/98/ME/NT.
Minimum System Requirements:
Windows 2000/XP (only)
AMD Athlon XP 1.5 GHz or Pentium III 1.5 GHz;
256 MB RAM
DirectX 9.0c-compatible graphics card from NVIDIA or ATI:
GeForce 3 and higher or ATI Radeon 8500 and higher.
DirectX 9.0c-compatible sound card
DirectX 9.0c (included on disc)
24X CD-ROM
450 MB Free Hard Drive Space
MS Compatible mouse
Keyboard
NOTE: Internet play requires broadband connection and latest drivers.
Recommended System Requirements:
Windows XP
AMD Athlon XP 2000+ and above OR Pentium 4 2GHz and above
512 MB RAM or greater.
GeForce 4 Ti and higher, OR ATI Radeon 9500 and higher.
DirectX 9.0c-compatible sound card (SoundBlaster Audigy preferred).
Supported Video Cards:
(PLEASE NOTE: All video cards must support DirectX Pixel Shaders 1.1, at minimum)
NVIDIA ATI
Geforce4 Ti 4400 series RADEON X800
Geforce4 Ti 4600 series RADEON X600
Geforce4 Ti 4800 series RADEON X300
RADEON 9800
RADEON 9800 XT
GeForce3 Series RADEON 9800 Pro
GeForce3 Ti 200 Series RADEON 9600
Geforce3 Ti 500 Series RADEON 9600 XT
RADEON 9600 Pro
Geforce FX 5200 Series RADEON 9200
Geforce FX 5600 Series RADEON 9200 SE
Geforce FX 5700 Series RADEON 9250
Geforce FX 5900 Series RADEON 9700
Geforce FX 5950 Series RADEON 9700 Pro
All-in-wonder 9700
GeForce 6800 Series All-in-wonder 9700 Pro
Geforce 7800 Series Radeon X1x00 Series
2. DIRECTX(R) DETECTION AND INSTALLATION
The Full Spectrum Warrior:Ten Hammers installer does not check for the version of DirectX(r)
you have currently installed. The Full Spectrum Warrior:Ten Hammers _requires_ DirectX(r) 9.0c
to install and play. The Full Spectrum Warrior:Ten Hammers disk includes DirectX(r) 9.0c or if
you do not have the disk you may download the latest DirectX(r) update from :
http://www.microsoft.com/windows/directx/default.aspx
II TROUBLESHOOTING:
1. Video
Please note that Full Spectrum Warrior:Ten Hammers will not automatically configure optimal video settings based on your computer's hardware. If your hardware changes after installation or you wish to customize your settings, select OPTIONS in the main menu and follow the on screen prompts.
A. Latest drivers required:
For best performance and video quality, please make sure you have the latest drivers for your video card when running Full Spectrum Warrior:Ten Hammers. If you have an ATI or NVIDIA video card, you can find drivers on their websites:
http://www.ati.com/
http://www.NVIDIA.com/
B. Disabling video options to gain performance:
In addition to setting Low Quality, disabling Blooming and Shadows will help improve performance. These can be disabled under the ADVANCED OPTIONS menu from the OPTIONS menu. Please note that while increasing performance, disabling these options turns off graphical features that are key in the Full Spectrum Warrior:Ten Hammers experience and add to the overall gaming experience.
C. If you are experiencing video or graphical issues, please check www.fullspectrumwarrior.com for installable updates.
2. Sound
Please make sure you have the latest drivers for your sound card when
running Full Spectrum Warrior:Ten Hammers.
III. Full Spectrum Warrior:Ten Hammers:
1. Controls
The default control configuration for Full Spectrum Warrior:Ten Hammers is listed below:
Keyboard Controls:
Tab - switch teams
w - select the team leader
a - select the grenadier
s - select the rifleman
d - select the automatic rifleman
space - cancel
e - precision fire
f - select frag grenade
1 - select buddy team 1
2 - select buddy team 2
Wheel Up/Down - zooms while in gps map
c - take cover
Mouse Controls:
Up - move view or cursor up
Left - move view or cursor left
Right - move view or cursor right
Down - move view or cursor down
Left Button - action
Right Button - activate movement cursor
Mouse Wheel Button - precision fire
Wheel Up - zoom in
Wheel Down - zoom out
Full Spectrum Warrior:Ten Hammers also supports the Microsoft Xbox 360 Controller for Windows. The default controls for the Microsoft Xbox 360 Controller for Windows is listed below:
Left Analog Stick - move cursor
Right Analog Stick - move camera
X - (1) fire cursor
A - (2) action
B - (3) take cover / cancel
Y - (4) switch teams / team select
Left Bumper - (5) select buddy team 2
Right Bumper - (6) select buddy team 1
Left Trigger - (7) zoom
Right Trigger - (8) precision fire
Back - (9) reports
Start - (10) pause
D-Pad Up - (13) select the team leader
D-Pad Left - (15) select the grenadier
D-Pad Down - (14) select the rifleman
D-Pad Right - (16) select the automatic rifleman
More articles about Full Spectrum Warrior: Ten Hammers