About Rainier

PC gamer, WorthPlaying EIC, globe-trotting couch potato, patriot, '80s headbanger, movie watcher, music lover, foodie and man in black -- squirrel!

Advertising

As an Amazon Associate, we earn commission from qualifying purchases.





'Unreal Tournament 3' (PS3) v2.1 Mod 'Cooking' Tool Available NOW

by Rainier on March 21, 2008 @ 6:36 p.m. PDT

One of the most anticipated UT3 features was the possibility of allowing PS3 gamers to import new community content/mods on their consoles. Epic has released an updated version of the tools to "cook" your own content, and transfer it from PC to PS3. This version is up to date for the newest PS3 patch released a few days ago, and requires the v1.2 PC patch installed.

Get the Unreal Tournament 3 [PS3] v2.1 Mod Toolkit off WP (2mb)

These tools enables the cooking of PC mods for use on the PS3. It is not a patch for UT3 and does not include any of the previous patch fixes nor any new fixes. This version supports the recently released v1.10 PS3 patch. It requires that patch 1.2 be installed.

Installation

  1. Install Unreal Tournament 3 for Windows
  2. Install the patch
  3. Install PS3ModTools.exe
  4. Select the installation location of Unreal Tournament 3 on your PC (C:Program FilesUnreal Tournament 3 by default)
  5. Note that you may need Administrator privileges to write to the installation location
  6. Make sure you have some type of removable media that you can connect to your PC. The PS3 can accept USB drives (including iPods!), USB thumb drives, SD cards, Memory Sticks, and Compact Flash devices.

Overview

Mod support for UT3 on PS3 is based on the PC toolset. There are no in-game mod tools that run on the PS3. However, this gives an incredible amount of freedom for people to make whatever they want (within reason, after all the PS3 has a limited amount of memory with no Virtual Memory).

This document will explain what can be done, how to do it, and how to transfer a mod to the PS3.

The general pipeline is:

  1. Create content and/or write script code.
  2. “Cook” the mod for the PS3 using Unreal Frontend (UFE) tool
  3. Insert a supported removable media device into your PC
  4. UFE will copy the mod to a special location on the device
  5. Bring the device to your PS3 and import it
  6. Play and test on PS3

What Is Supported

The following types of mods are supported. See the Not Supported section for any restrictions.

Maps

These mods are created and saved with UnrealEd.

These are new maps that are intended for Epic supplied game types, or for
your own game types.

Mutators

These mods are programmed with UnrealScript.

These can be activated optionally during matches. These can range from replacing all weapons to changing gravity in odd ways to affecting player movement.

These can be auto-downloaded from a server running the new game type without needing to install the mod on the client PS3s. Note that this is just to play as a client; to run a server (or offline) with the mutator, you will need to install the mod the standard way. Auto-downloaded mods are put into a temporary cache only.

Game types

These mods are programmed with UnrealScript.

This is a new set of game rules that use existing maps (see Total Conversions for game types)

These can be auto-downloaded like a mutator, above.

Custom Characters

Character pieces are simply building blocks for the custom character system in UT3

Total Conversions

A Total Conversion, or TC, typically means replacing all of the content that shipped with a game with completely unique content, including the main menu.

On the PS3, the main menu cannot be replaced, but it can be used to load another level that is the TC’s main menu. This can then branch off to load the TC’s maps, etc.

These are generally a combination of new game types, new models, and new levels.

Other modifications may work, but these are what we have tested and planned for.

What Is Not Supported

Naturally, given the limited memory on PS3, etc, there are limitations to what you can do.

Mutators and game types must consist of UnrealScript code only. This means that you cannot have a mutator that turns all UT3 weapons into a space cow model that you import.

This is because they need to work with shipping maps, and too much content added on will cause the PS3 to run out of memory.

Importing sounds is not supported. This is because UT3 uses a proprietary version of ATRAC3 and we are unable to release the tool that is needed to convert .wav files to the format required by the game.

It is unknown if we will be able to have some system for sound conversion in the future.

We understand the limitation this places on mod developers, and will rectify this if at all possible in a future version.

Mod Creation on PC

First, familiarize yourself with the Unreal Engine 3 toolset. See the Unreal
Developer Network (UDN - http://udn.epicgames.com) for lots of information
about the tools.

This document does not cover using the tools or writing script code. Please
see UDN for more information.

You will create your content for the PS3 just the same as you do for PC
(following the above restrictions).

You will first want to test your mod on the PC version, as the iteration time
will be faster. Note that the .ini file creation for the PC mods vs. the PS3
mods are different, and will need to be handled.

Once you are ready, you can bring your mod from the PC to the PS3.

See the Mod File Locations for specific information about where files will
need to be so the cooking tool can find the packages.

You will need to run the UnrealFrontend (UFE) tool. It is located in the
Binaries directory of the installation location for Unreal Tournament 3.

The important tab is the Cooking tab.

Note that this tool is the same tool that is used internally to create the
game, so some options may not be needed for making a mod.

Important Properties

Maps: This is the location you will enter the names of the packages you need
to “cook.” This is slightly misnamed because you will put UnrealScript script
code packages here when cooking a script-code only mod (ie, mutator). NOTE:
For Total Conversion mods, specify the maps, not the script code package that
contains the game type. As long as the maps refer to the gametype in the game
types array in the world properties, it will cook the script code into the map
packages, and work properly.

Full recook: Cooking happens incrementally, so if it won’t recook stuff that
hasn’t changed. However, if you want to cook all packages in the mod, select
this to delete all incremental changes. This basically starts the cooking
process over from scratch.

Mod Type: This is where you select the type of mod you are making (see the
What Is Supported section above for more information on each type). This is
used to generate a configuration (.ini) file from a template. The .ini file is
used to integrate the mod into the menus and/or game. Selecting “None” will
not create an .ini file, so you will need to manually manage integrating it
into the game.

PS3 game version: Select what version of the PS3 disc you have. The right
version is needed so that the game you are running can find the mod on the
removable media when importing it.

Package Mod: This button can be used to put a bunch of files onto the
removable media without needing to recook the data. It will bring up a dialog
for you to select the files you want, just select the files in a previously
cooked mod. Cooked mods will be located in:

My GamesUnreal Tournament 3UTGameModsPS3

Cooking

To prepare the data, click on the Cook button. This will bring up a dialog
asking for the name of your mod. This is very important, and should be unique
for each mod. Use the same name when iterating on the same mod.

When importing a mod on the PS3, it will overwrite any existing mods with the
same name (deleting the previous one).

Then it will run the cooker tool to convert the data into the right format for
the PS3. This can be fast or slow depending on the type of mod and its
contents (map vs. mutator, for example).

The first time you cook a mod, it will prompt you to review the .ini files it
has generated. (See the Ini Files section below for more information.)

Finally it will ask you for the location of your removable media.

Select the drive letter that corresponds to the media. It will always write to
the root of the device, so there is no need to browse to a subdirectory of the
device. After the copy finishes (there is currently not a proper indication
that it is done copying – just look for the utility to be responsive again),
remove the removable media, and bring it over to the PS3!

Note that due to PS3 file import restrictions, you can only have one mod at a
time on the removable media. When UFE copies the mod to the media, it will
overwrite any existing mod.

Mod Name Information

The name of the mod is very important. Certain files are named specially based
on the name of the mod, and cannot be changed once you choose a name of the
mod.

This also means that you cannot take two mods (in separate directories) and
combine them into one. You are able, however, to cook a mutator script package
and several maps into the same mod! If you do this, choose one of them as the
mod type in UFE, then manually edit the .ini file to include the other
information. (See the Ini Files section for more information).

Ini Files

The game uses .ini files to integrate the mod into the menus and the game.
These are very important!

UFE will copy some templates for generating .ini files. Note that generated
.ini files are likely to not be 100% perfect, especially for the code mod
types. It is worth understanding the contents of the various .ini types.
Following is a list of contents of the various mod .ini types with
explanations of what’s included, which you may want to modify (explanation
text is in italics).

Map mods(PS3-UTGame.ini):

[DM-MyMap UTUIDataProvider_MapInfo]

The first line must be your map name followed by UTUIDataProvider_MapInfo,
in brackets

MapName=DM-MyMap

Next comes the name of the map package on disk (without the .xxx
extension)

FriendlyName=MyMap

The friendly name is what’s shown in the menus

PreviewImageMarkup=

It is possible to load your own images for map preview in the main menu.
This is where you would point to your texture. See the Other Ini
Functionality section for information on adding extra textures

Description=This is my first map!

Here you can describe the map that is visible in the menus for more
information about the map.

Mutator mods (PS3-UTGame.ini):

[MyMutator UTUIDataProvider_Mutator]

Like maps, you need the mutator name followed by UTUIDataProvider_Mutator

ClassName=MyMutator.MyMutator

This is the name of the mutator class that you wrote in script code –
PackageName.ClassName. Note that the default value is to use the mod name
for packagename and classname, so this likely will need to be updated,
depending on how you named your class.

FriendlyName=MyMutator

This is name of the mutator as seen in the mutator list.

Description=My mutator rocks!

You can provide detailed information about your mutator if desired.

[LoadForAllGameTypes] Package=MyMutator

This is a very important section, as it will allow the mutator to be
loaded in the game. By default, the Package is set to the name of the mod,
so will likely need to be changed.

Gametype mods (PS3-UTGame.ini):

[Engine.PackagesToFullyLoadForDLC] GameType_PreLoadClass=MyGame.MyGame

Enter the script package name and gametype class name as
PackageName.GameTypeName. This will tell the game to load the below
package when the above gametype is played. Note that the default value is
to use the mod name for packagename and classname, so this likely will
need to be updated, depending on how you named your class.

Package=MyGame

Note that the default value is to use the mod name for packagename

[MyGame UTUIDataProvider_GameModeInfo] GameMode=MyGame.MyGame

Copy the value from GameType_PreLoadClass, above

FriendlyName=MyGame

Name that is listed in the Game Types menu in the game

Description=This is my first game type.

Detailed description of the game type

Prefixes=DM

Set the prefix that your game type handles for existing or your own maps
(DM to use Deathmatch maps, for instance)

PreviewImageMarkup=

It is possible to load your own images for map preview in the main menu.

This is where you would point to your texture. See the Other Ini

Functionality section for information on adding extra textures.

Character piece mods (UTCustomChar.ini):

[CustomParts] CustomParts=(Part=PART_Helmet,ObjectName="MyChars.MyHelmet",PartID="MYCHARSA",FamilyID="IRNM")

See part names, below

For Part, use one of the following to describe what kind of body part it is:

PART_Head
PART_Helmet
PART_Facemask
PART_Goggles
PART_Torso
PART_ShoPad
PART_Arms
PART_Thighs
PART_Boots

For ObjectName, use the package and object name for the mesh that you have
created.

For PartID, use a unique name

For FamilyID, use one of the following to choose which body type the part is
found in the menus

IRNF – IronGuard Male
IRNM – IronGuard Female
KRAM – Krall Male
LIAM – Liandri Female
NECF – Necris Female
NECM – Necris Male
TWIF – TwinSouls Female
TWIM – TwinSouls Male

Total conversion mods (PS3-UTGame.ini)

Total conversions are a combination of a Game Type and a Map mod, so you can
see the above descriptions for how to change the settings.

NOTE: For Total Conversion mods, specify the maps, not the script code package
that contains the game type. As long as the maps refer to the gametype in the
game types array in the world properties, it will cook the script code into
the map packages, and work properly.

Miscellaneous info

Note that you can add more entries in .ini files for things like multiple maps
in one .ini file, etc. There are some notes in some of the generated .inis.

Other Ini Functionality (Technical details)

Only certain ini file sections are supported. When packaging a mod, UFE will
validate the .ini files in it to make sure they do not have any illegal
sections.

However, you can modify your .ini file beyond that above, which you may need
to do, depending on your mod. The important section to know about is
[Engine.PackagesToFullyLoadForDLC]. Note that the terms DLC (DownLoadable
Content) and Mods are interchangeable (the only difference is where you get it
from – imported by the user vs the Playstation Store).

The section has the following format:

[Engine.PackagesToFullyLoadForDLC]
MapName=UTFrontend
Package=MyModContent1
Package=MyModContent2
GameType_PreLoadClass=MyGame.MyGame
Package=MyGameContent1
GameType_PostLoadClass=MyGame.MyGame
Package=MyGameContent2

This will tell the engine to fully load a package for specific needs. This is
because the console won’t load single objects out of packages, it will only
load entire packages.

Normally, when a mod is cooked, everything it needs is pulled into the
package, but if there is script code that calls DynamicLoadObject or similar,
the object won’t be cooked into the package, so you will need to load the
entire package before calling DynamicLoadObject.

The above section can control package loading, based on specific maps or game
types.

For instance, to load a game type mod, the game needs to load the entire
script package that contains the game type before it can use the game type
object as the game type.

One very interesting use of this is with the MapName=UTFrontend. If you want
to have an icon/preview picture for your map, you will need put the name of
the texture object in the PreviewImage line in the .ini file, but you will
need to fully load the package first! By using the MapName=UTFrontend in your
.ini, it will guarantee that the package containing your texture is loaded
while the main menu (UTFrontend) is loaded. Then the texture can be found.

You will want to put your texture in the UI LOD group, and cook the package
containing the texture using the UFE cooker (in the Maps line).

Importing on PS3

After UFE has copied the mod to the removable media device, simply insert the
removable media into your PS3.

In the Main Menu, go to the Community section. Then select My Content. This
will show a list of installed mods. Press Square to bring up the import
dialog. This standard PS3 dialog will allow you to select a device to import
from.

Select the device, select Yes to import it, then wait while the mod is first
copied to the PS3 Hard Drive, and then unpacked. The time this takes will
depend the size and type of the mod.

For all mod types except character pieces, the new items can be found on the
appropriate menus. For instance, for a new Deathmatch map, go to Instant

Action, select Deathmatch, and your map will be there.

For character pieces, you will need to quit the game to the XMB/System
Software, and run the game again.

Mod File Locations and other details

For the following, refers to “My DocumentsMy Games”

Script Code:

When compiling script code, you put your script files in:

UTGameSrcClasses

To register the package with the engine, edit:

UTGameConfigUTEditor.ini

Create a section called [ModPackages] if it doesn’t already exist, then add:

ModPackages=

You will want one ModPackages line for each script package you create.

To compile, use UFE (the Script tab Compile Scripts button, or Make on the
toolbar), or run the following from the Binaries directory on the

commandline:

ut3 make [-full]

Maps:

When you save the map in the editor, it should be saved to:

UTGameUnpublishedCookedPCCustomMaps


Custom character pieces:

When you save the package in the editor, it should be saved to:

UTGameUnpublishedCookedPCCustomChars

You MUST mark the custom character packages as not downloadable. To do this,
run the following commandline from the Binaries directory in your installed
game directory:

UT3 setpackageflags ..UTGameCookedPCCustomChars.upk serversideonly=TRUE

You will only need to do this one time for each package you create.

Sharing Your Work With Others

Once you are ready, you may want to share your mod with others so that you can play the mod online.

For code-only mods, clients connecting to the server will be able to have the code downloaded to the client’s PS3 hard drive. This won’t install it fully, so that client won’t be able to use the mod themselves, but it will allow clients to connect without downloading the mod.

For content mods, the client will need to get the mod installed to their PS3 before they can join the server running the mod (UT3 doesn’t support downloading such large files as maps).

To share your mod with others, you can simply copy the PS3 directory from the removable media to your PC hard drive, archive it, and then upload it to a location where it can be downloaded by others.

Then, other people can just download the archive, decompress it to some form of removable media, and then install it on the PS3 in the standard way.

Copyright © 2001-2007 Epic Games

blog comments powered by Disqus